Mon-Fri, 7am-5pm CST


Material Information

Rulon® is the brand name for Saint Gobain’s reinforced PTFE. Filled PTFE offers a combination of high compressive strength, a low coefficient of friction, chemical resistance, electrical insulation, and excellent abrasion and corrosion resistance without the need for lubrication. These materials can run from -400º F to 500º F with or without lubrication, which makes them ideal for use in bearings or seals. Rulon® material specifically is known to have the unique property of no “slip stick”, which means it has no erratic motion at low speeds. Rulon® AR has fillers that are ceramic in nature. This grade offers the best combination of flexibility (more flexible than Rulon® LR) and load carrying properties. It also has high wear resistance, low friction, good electrically insulative properties, and universal chemical inertness. It is commonly used for seals, piston cups, and some bearings. It is available in a maroon color. Rulon® LR is the most widely used grade of Rulon®. It offers high wear resistance, low friction, good electrical properties, and chemical inertness. It can be bonded to nearly any surface to provide wear resistance and reduce friction. This makes Rulon® LR a great material for sleeves and flange or thrust bearings. It is available in a maroon color. Rulon® J is an all-polymeic reinforced grade of PTFE. It runs exceptionally well against soft mating surfaces such as stainless steel, aluminum, brass, and other plastics. It provides the lowest coefficient of friction of the Rulon® grades as well as good wear and abrasion resistance. It is well suited for use in bearing and seal applications, but not for use in alkaline or oxidizing acid solutions. It is available in a light brown color.


  • Belts
  • Wheels
  • Arc shields in railroad cars
  • Wear strips
  • Metal forming pads
  • Bumpers
  • Gears
  • Bellows
  • Machinery mounts
  • Cutting surfaces
  • Sound-dampening pads
  • Chute and hopper lines
  • Prototype machined parts
  • Gaskets
  • Seals
  • Rollers
  • Roller covers


  • Very broad hardness range
  • High elasticity
  • Tough and durable
  • Excellent abrasion resistance, oil and solvent resistance, tear resistance, weather resistance, and heat/cold resistance
  • Excellent flex life
  • Excellent electrical properties
  • Abates noise


PhysicalAstm Test MethodRulon® ARRulon® LRRulon® J
Density (lb/in^3)D7920.0810.0820.07
Specific GravityD7922.242.271.95
Water Absorption @ 24 hours (%)D570000
Hardness, Shore DD224060-7560-7560
Tensile Strength (PSI)D14572,0001,5002,000
Tensile Elongation at Yield (%)D1457175150180
Izod Impact (Notched), ft-lb/inD25666
Coefficient of Thermal
Expansion, 10^-5/°F
D696Varies with tempVaries with tempVaries with temp
Continous Service Temp (Operating), °F500500500
Flammability RatingUL94NoneNoneNone
Dielectric Strength, Short Term,
(Volts/Mil) @ .125″ Thick
Volume Resistivity (ohm-cm) @ 50% RHD2571.0 x 10^151.0 x 10^158.0 x 10^18
Dielectric Constant at 1 MHzD1502.52.52.4
Dissipation Factor at 1 kHzD1500.0030.0030.001

Disclosure: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.


Product Quote Request

Scroll to Top