1-800-486-4742

Mon-Fri, 7am-5pm CST

PPS – BEARING GRADE (POLYPHENYLENE SULFIDE)

Material Information

PPS (PolyPhenylene Sulfide) is a semi-crystalline engineering thermoplastic. It offers the broadest resistance to chemicals of any advanced engineering plastic. There are no known solvents that effect PPS under 392º F, and it is inert to steam, strong bases, fuels, and acids. It is ideal for precise tolerance machined components because it has minimal water absorption, has a very low coefficient of linear thermal expansion, and is stress relieving manufactured. PPS is also a great option for structural applications, corrosive environments, and a lower temperature replacement for PEEK. At moderate temperatures PPS offers great dimensional stability and strength. The bearing grade of Quadrant PPS is internally lubricated, carbon fiber reinforced, and compression molded. It offers a low coefficient of thermal expansion with uncompromised chemical resistance. It is a great option for wear applications that require an electrically conductive material.

Application

  • Lantern rings
  • Aerospace applications
  • Pump housings
  • High-pressure liquid chromatography components
  • Water retaining rings
  • Hydrocarbon pump, valve, and compressor components
  • Oil field parts
  • Medical and diagnostic device parts
  • Electronic test sockets and fixtures
  • Flow meter rotors
  • Engine sensors
  • Halogen lamp sockets

Properties

  • Broadest resistance to chemicals of all advanced engineering plastics
  • Self-lubricated
  • Electrically conductive
  • Inert to steam, strong bases, fuels, and acids
  • Minimal water absorption
  • Very low coefficient of linear thermal expansion

Specifications

PhysicalAstm Test MethodBearing Grade PPS
Density (lb/in^3)D7920.056
Specific GravityD7921.55
Water Absorption @ 24 hours (%)D5700.02
Mechanical
Tensile Strength (PSI)D63810,000
Tensile Modulus (PSI)D638800,000
Tensile Elongation at Break (%)D6381.5
Flexural Strength (PSI)D79015,000
Flexural Modulus (PSI)D7901,000,000
Compressive Strength (PSI)D69515,000
Compressive Modulus (PSI)D695800,000
Izod Impact (Notched), ft-lb/inD256M93, R126
Rockwell HardnessD7851
Thermal
Coefficient of Thermal Expansion,
10^-5/°F
D6961.7
Heat Deflection Temperature 264 psi, ºFD648490
Glass Transition Temp, ºFD3418NA
Continous Service Temp (Operating), °F450
Thermal Conductivity, BTU-in/hr-ft² °FC1772.2
Flammability RatingUL94VO
Electrical
Dielectric Strength, Short Term,
(Volts/Mil) @ .125″ Thick
D149
Volume Resistivity (ohm-cm) @ 50% RHD257
Dielectric Constant at 1 MHzD150
Dissipation Factor at 1 MHzD150

Disclosure: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.

 

Product Quote Request

Scroll to Top